90i-610s 1A 至 600A 交/直流電流探頭

The 90i-610s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope ,Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter a BNC to banana plug adapter PM9081/001 (included) lets you use this probe with your DMM. Current Range: 1 to 600 A DC or AC Peak Basic Accuracy (DC to 400 Hz): +/- (2% of reading + 1 A) Output Signal: 100 A range: 10 mV/A | 600 A range: 1 mV/A Frequency Range: 40 Hz to 400 Hz Working Voltage: 600 V AC rms Maximum Conductor Diameter: 34 mm (1.34 inch) Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V

PV350 Pressure Vacuum Module

Compatible with all Fluke and most popular DMMs Digital pressure and vacuum measurements in a single module Transducer sealed in 316 stainless steel compatible with variety of liquids and gases Measures vacuum to 76 cm Hg Displays results in English (psig of Hg) or metric (kPa or cm Hg) units Measures pressure to 3447 kPa (500 psig) One year warranty

RPM80 感應式采集/外部觸發器

Provides RPM readings.

TL28A63in. 鱷魚夾測試線組

Large jaws, long leads and a piercing probe. Solid, spring-loaded copper clips with a wide 12.7 mm (.50") jaw opening and serrated teeth. Large piercing needle for penetrating larger gauge wires. 1.5 m (60"), silicone-insulated leads, useable from -80 °C to +150 °C (-112 °F to +302 °F). Rated for 30 V, 10 A. One red, one black. Flexible silicone insulated leads are heat and cold resistant Cat I 30 V, 10 A

 接插線組/TL930，TL932，TL935

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!